Search the Community
Showing results for tags 'h7'.
Found 2 results
Hi guys, Sorry if I don't explain this too well, but I'll try and clarify where I can. I recently purchased some new LED bulbs for my high beam H7s (wanted to move from halogens). They are the CREE LED bulbs with a heat sink/fan at the end (you can probably see loads on eBay). An example of a similar bulb below; The problem is, I can't use the H7 metal bracket to clip the bulb in place. This is because these new bulbs have a huge fixed heat sink/fan at the end so I can't attach the metal clip from behind. The black H7 fitting ring unclips and slides out through the front for "easy fitting" but I can't slide the metal bracket from the front as the bulbs are thicker than what the bracket allows (see below) It seems as though even if I manage to get both back on the bulb, the fitting ring wont have the room to "clip" back on the bulb which won't fix my problem of a loose fit? Any advice? Anyone had experience fitting these bulbs and how they went about it? I've returned the set I bought as one bulb was faulty so before purchasing a new set, I thought I'd see if anyone has any input on the fitting? Thanks!
Hi im wondering if anyone can help me with this problem I am having - I recently upgraded my headlights to H7 HID kit on my 520d Msport Lci Step Auto - everything was going fine but then I noticed when I switch the HID lights on I get a little jerk in my car. It does not happen all the time, just on the odd occasion. If I am driving in Manual mode, it either automatically drops my gear down or if i am slowing down/standstill in traffic and I switch the light on I get the jerk and it changes the gear to DS Or if i am driving in D the little orange light on the gearbox goes out for a split second and lights back up, also this results in my gear to drop down automatically (only notice it as my revs increase). Its a bit hard to explain so sorry if i have confused you all - its like whenever it happens its like theres an extra volt that goes through the car to initially power up the H7 bulbs and thats what is causing the issue - but i may be wrong. I know bulbs have nothing to do with the auto gearbox, but as that auto gearbox also gets some sort of power supply from the battery, thought this may all be interlinked. Any one experienced this before? Or any advice on what i can do? I really like the HID upgrade I have got and do not want to get rid just coz of this jerk issue I am having. Also dont know if the problem is interlinked, I have 10w CREE LED AE bulbs in which flicker when the car is initially started and I have also got white LED number plate bulbs with a built in resistor (these have never flickered though when the car is started or AE or H7 bulbs are switched on)