Jump to content

Ecobasic

Members
  • Content count

    23
  • Joined

  • Last visited

  • Feedback

    N/A

About Ecobasic

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Ecobasic

    E39 530D manual swap problem

    As for Testo, no i dont have it sadly but i might give it a shot
  2. Ecobasic

    E39 530D manual swap problem

    Didnt throw any codes at all, what i noticed tho is that the Cat is broken and pieces are dangling inside of it. I will remove the cat today, try again and see if i get codes
  3. Ecobasic

    E39 530D manual swap problem

    Hello sinner! I used the exact pedal you mentioned, and for the connector i pinned on the one from the manual since they cut the wire from the donor car after the plug. No dde lights either for me, and i know the complete cut. It isnt a complete cut tho, it feels like its just regulating the power down
  4. Ecobasic

    E39 530D manual swap problem

    Hello Guys, I completed the manual swap by doing all the electronical things (flashing manual DDE Software etc), and fitting a manual E-gaspedal. Everything works fine, however in lower rpms 1500-2100 approximately if i go full throttle the car gets some boost and instantly goes off power again even showing on the current consumption dial, then spools up again and loses power again, all until 2150 RPM where everything is fine afterwards and all the power is here. Does anybody have an idea? BR Michael
  5. Ecobasic

    E39 530D Manual Swap Coding

    I tried it again in WinKFP after disconnecting battery and emptying it. It finds the dde with correct number but im getting this error again
  6. Ecobasic

    E39 530D Manual Swap Coding

    Now i fried the DDE, anyway to recover it?
  7. Ecobasic

    E39 530D Manual Swap Coding

    Ok i think i fried my DDE, what are my options?
  8. Ecobasic

    E39 530D Manual Swap Coding

    Ok i managed to do it but when i try to programm it shows this
  9. Ecobasic

    E39 530D Manual Swap Coding

    This is where i am stuck, i cant change it to the ZUSB i want
  10. Ecobasic

    E39 530D Manual Swap Coding

    Update! I managed to code the ZCS. However i cant figure out how to flash via WinKFP...
  11. Ecobasic

    E39 530D Manual Swap Coding

    Cheers! Will do that tomorrow
  12. Ecobasic

    E39 530D Manual Swap Coding

    Ok so i checked ZCS hasnt been changed - so this error is my only obstacle
  13. Ecobasic

    E39 530D Manual Swap Coding

    I tried to code all modules, i can't find the code car option.. and it shows this error in every module. I enter ZCS, go back to main, chose ecu and tried to sg_codieren them all. I think i might do it wrong.. would it be to much to ask you to record a video for me? I feel dumb. I even thought maybe the previous owner already codes ews and ike, since the speedo doesnt show PRNDS selection anymore
  14. Ecobasic

    E39 530D Manual Swap Coding

    I cant code it, getting thiserror
  15. Ecobasic

    E39 530D Manual Swap Coding

    Hello! Sorry for the delay, i finally got my car back, didnt code yet - i want to double check. First picture is data, 2nd is the SA i would use Is this correct? What else do i need to change? Thanks!
×