Jump to content

Orphee

Members
  • Content count

    14
  • Joined

  • Last visited

  • Feedback

    N/A
  1. Orphee

    Firmware V6.02-7058 and User Guide

    In fact I can't find the module to test windows in ISTA/D... I was able to do it on my 330 E46, but here I can't find it.
  2. Orphee

    Firmware V6.02-7058 and User Guide

    Thank you, it worked, back to 115200 And auto close does not work on the M5 too... it also has confort closing...
  3. Orphee

    KCA-420i wake-up mod

    An Ipod 5th gen 30GB and an Ipod classic 6th gen 30gb
  4. Orphee

    KCA-420i wake-up mod

    So I should use this one in my daily car and, the new mod in my occasional M5. Thank you
  5. Orphee

    KCA-420i wake-up mod

    Hello, I just did the mod on my first KCA-420i and it works fine. I was about to do the same on my second KCA-420i and I found this : I guess something have been done with it. Do I have to leave it as it is currently ? Thank you.
  6. Orphee

    Firmware V6.02-7058 and User Guide

    Hello I just tried, absolutly no reaction at all with cw commands. No error, command sent, back to "ready", but nothing happens.
  7. Orphee

    Firmware V6.02-7058 and User Guide

    I have the comfort closing I guess, as I can open and close windows from the remote key with long press on buttons.
  8. Orphee

    Firmware V6.02-7058 and User Guide

    Not really a big deal as I won't connect it quite often... So I tried again the "auto close" window feature, and no matter what I do, it simply does not work at all. No reaction. Tried E38/E39 type and E39 Late, same behavior.
  9. Orphee

    Firmware V6.02-7058 and User Guide

    @RichardP Currently flashing, 38400 did the trick How do I switch it again do 115200 ?
  10. @t3ddftw Do you already have a lot of pre-order ? Thanks
  11. Orphee

    KCA-420i wake-up mod

    Hello, May I ask why is it necessary to make a drill and not simply cut the track with a little cutter ? Thank you
  12. Orphee

    Firmware V6.02-7058 and User Guide

    @RichardP and other question/info, I have a "little" bug when the radio TMC info traffic is enabled. When a traffic info is received, the screen automatically switch to INFO menu, then at the end, or when you push INFO button, it leaves INFO traffic mode, but then the Intravee screen is frozen. I have to use the little icon button near MODE twice to leave and go back to intravee screen.
  13. Orphee

    Firmware V6.02-7058 and User Guide

    Ok I'll try this evening I tried 9600 and did not work Thank you Edit : For the record I flashed with the USB to Serial adaptor first time, and after a lot of fail/retry it finally updated, but then the strange char appeared. Since then, both laptop have the same issue, so I'll try lower value this evening. Thanks
  14. Orphee

    Firmware V6.02-7058 and User Guide

    Hello, @RichardP may I ask some help ? I updated my FW to 7058 but had a lot of failed / retry while flashing... Now I see there is newer FW here, but I'm not able to flash it anymore, no matter what I do, I have 2 laptops, one with usb to serial, and one with genuine serial, both do the same strange characters when plugged to intravee. On the car, the intravee works fine, music, ipod, controls... just the auto close feature does not work (2003' 530i E39) Thank you.
×