Jump to content

Pl@y3R

Members
  • Content count

    11
  • Joined

  • Last visited

  • Feedback

    N/A

About Pl@y3R

  • Rank
    Newbie

Garage

  • Garage
    BMW E60LCI
  1. Pl@y3R

    What's this in the glove box?

    It looks like the MOST connector.
  2. Pl@y3R

    PDC Fault Diagnosis (Guide)

    Glad it worked for you, I have a CIC installed in my car, changing lines only in CIC didn't help in my case, I didn't had the opportunity to test it in a car with CCC or Mask.
  3. Pl@y3R

    PDC Fault Diagnosis (Guide)

    You're right,also in CIC or Mask are also a few lines, but changing it will only change the front/rear, horizontal /vertical display and will have no effect for PDC errors. As we know the parking sensors is a closed circuit, when one sensor is faulty nothing works,so by "telling" the PDC only rear sensors are activated, it will stop checking the front ones...so no more errors.
  4. Pl@y3R

    PDC Fault Diagnosis (Guide)

    Hi, I have a provisional solution for faulty front sensors/wiring. If you have a working PDC ecu (you can test it with NCS, ISTA) but one of these errors: 9E37, 9E38, 9E39, 9E3A and 9E3B in my case, you have to disconnect front wiring from PDC, then read ecu with ncs. You'll find a line: ANZAHL_WANDLER... 8_wandler, you have to change it to 4_wandler, code it, then the PDC will work again, but only rear sensors. In some cases you have to activate it with ISTA-D.
  5. Pl@y3R

    PDC Fault Diagnosis (Guide)

    Hi, many thanks for all helpful informations. E60LCI: full PDC Retrofit with used PDC, front/rear wiring looms and 8 new sensors. I have two errors: 9E29 (Display error) and the famous 9E3B error. I've opened the PDC module to look for some water damage, I've checked each transistor and everything looks fine inside. When I unplug the front wiring from PDC, the rear sensors works fine and I have only 9E29 error. When everything is plugged, nothing works and I have both errors. Thanks for any advise
  6. Pl@y3R

    Code sos off in ncs expert

    After Fa_write code kombi, cic and MULF with empty. MAN file.
  7. Pl@y3R

    Wing Mirror Painting.

    Hi, it's 30 min job. First, you need to disconnect the battery, wait a few minutes then removes the 3 bolts of the door panel. Disconnect the airbag and the connectors(speaker, window button), remove the door panel, then gently lift the tweeter plastic cover and you'll find the mirror's 3 bolts. Take a look here:
  8. Pl@y3R

    Ccc unit

    Hi, take a look here: https://mca.electricmura.ro/en/
  9. Pl@y3R

    Halogen to LED upgrade bulbs

    Hi, I've bought this one a few years ago but I don't think is still available. https://s.click.aliexpress.com/e/V5488wk
  10. Pl@y3R

    Halogen to LED upgrade bulbs

    If you want to upgrade from halogen to leds, I advise you the Cree leds which is much better then the cobs. I've bought for my previous car all types of H7 leds until I've found what I was looking for.
  11. Hi, I've sent you a Pm
×