e39liam

Members
  • Content count

    58
  • Joined

  • Last visited

  • Feedback

    N/A
  1. I used a saloon dap loom for dsp retrofit in my touring the only wire I needed to extend was from bm54 to the sub in the side of the boot as a posed to the parcel shelf of a saloon Sent from my iPhone using Tapatalk
  2. Recently done this myself box came from 523i as did prop and diff, used a 530d clutch and flywheel just for the extra 10mm surface area to future proof for my turbo build, no wiring all I did was linked pin 1 and 3 in the ews box and wired a clutch switch for cruise control just piggybacked to the cruise brake pedal switch and I've done 1800 miles without a problem so far lol all I need to do is wire up the reverse signal when I have time (this goes to the purple stripe wire I believe in the instrument cluster) Sent from my iPhone using Tapatalk
  3. Had and seen some really good work done by Julian, he's a really good lad and reasonably priced
  4. I need a price on a 51317059699 Thanks Liam Sent from my iPhone using Tapatalk
  5. I'm after a climate comfort windscreen off an e39 will remove it myself if I have to, does anyone know anyone breaking a car boasting one? Sent from my iPhone using Tapatalk
  6. Very good welder with many years experience, specialises in cars,vans , trucks etc and many happy customers to back up his work Sent from my iPhone using Tapatalk
  7. Was the tq converter changed along with the gearbox? Sent from my iPhone using Tapatalk
  8. Well deserved scrub up inside Sent from my iPhone using Tapatalk
  9. Do any of your e39 have a climate comfort windscreen? Also do you have an m50b25 inlet manifold? Sent from my iPhone using Tapatalk
  10. Hi there what coilivers are they? Sent from my iPhone using Tapatalk
  11. Hi are the seats definitely contours? My phone screen is close to dead and can't see properly Sent from my iPhone using Tapatalk
  12. https://www.ebay.co.uk/itm/150987109709 Sent from my iPhone using Tapatalk
  13. Just buy the seat pad bypass off eBay and plug it in to the passenger loom, on mine I had to then reset the light Sent from my iPhone using Tapatalk
  14. I just use a Samsung laptop (full size) with an i7 processor and a BM cables set that includes the pacman to obd converter and it works brilliant on my 2 e39 (523tourer and 540i saloon) and my e65 730ld no problems at all, also have plugged many mates e36,e46 etc in and earlier today reset adaptations on my parents e70 x5 so it seems I have gotten lucky with a rather good combo really starting to get my head round the inpa now and I can say that I prefer it to dis, I am willing to help you to the extent of my knowledge but I must say I am certainly no expert but if there's a question I can answer I will
  15. Hi, I too read the same information and have 12v at 15 on my 523i a of '97 but decided to bite the bullet anyway and I have no problems entering every interface of my car through USB via inpa and dis (have not tried anything else but am going to have a go at coding soon I think) Sent from my iPhone using Tapatalk