Jump to content

rc944

Members
  • Content count

    35
  • Joined

  • Last visited

  • Feedback

    0%

About rc944

  • Rank
    Newbie

Profile Information

  • Gender
    Male
  • Location
    Buckinghamshire

Garage

  • Garage
    E39 525i Sport Touring I Alpina B3s Coupe I Ducati 748R
  1. ive been getting the 'no discs' message on teh head unit despite changing cartridges. is it a new changer job to resolve? assume there isnt anything in inpa that can help clear teh fault given its more mechanical failure?
  2. New brake pipes fitted

    copper nickel here.... good shout on getting the underside prepped and treated. the sills around jacking point on mine were not looking too happy in terms of cost i would budget for around 5 hours labour.... it could take less but i was very happy with the quality of the work and peace of mind
  3. lemforder rear upper control arms

    excellent thanks... how did you come across that information?
  4. Lemforder supply 2 versions. One for pre 01 and another for 01 onwards. I may have the dates a bit off but can't check at the mo. Does anyone know the difference other than about 35 quid difference per unit? I can't find any technical specs but can try lemforder in the morning.
  5. New brake pipes fitted

    So having had my second e39 baseline inspected shortly after it was bought earlier this year the pipes were flagged as a need to do now issue. Had them done and for posterity kept the old ones. Having examined them I have to confess that I was shocked at their condition. The sections around the rear diff area were especially bad and in some points the corrosion had substantially thinned the wall of the pipe. The runs went straight from the rear and followed the correct path into the joint rear of the osf wheel. Rear axle was dropped for access so not something that I would feel brave enough to do at home. Feel better now it's been done and no risk of catastrophic brake failure. Russ at Dm worx in stoke mandeville did mine and he takes a lot of pride in his pipes as can be seen in his nut and bolt rebuilt e36 m3 evo coupe. I'm quite fussy but having seen how he painstakingly formed the pipe (not pure copper) even I was impressed If your pipes have been advised during an mot might be worth getting them looked at very closely whilst the car is on a ramp! Unfortunately I forgot to take pics of the new ones in situ
  6. e39 winter wheel / tyre combo

    Looking for something a bit more plug and play but thanks for the thought!
  7. a friend may be passed on a 1 owner from new 523i saloon with fsh and about 70k miles.... what would be the likely range valuation wise that he needs to think about? would about 500-1500 be about right?
  8. e39 winter wheel / tyre combo

    Looking for a set of 16" style 48, 18, 32 or 33's (7x16 et 20) ideally with premium branded winter tyres in a 225/55/16 size with a date of manufacture of 2014 or later happy to consider wheels or tyres standalone!
  9. E39 facelift headlight adjuster

    I had the same issue with aalignment so used another vehicle as a proxy. All you need is a wall or similar and measuring tape. Use the reference car to establish the height of the beam at a given distance between the lens and surface. Crude but should help get them beam roughly right. To get even more precision get the same amount of fule and load in them!
  10. Alpina touring on A47

    pop over when you can... slow but friendly and knowledgeable
  11. E39 facelift headlight adjuster

    nice job on the lens... i did a set of adjusters and went in through the back. what a pita. may need to do another one. requires lots of patience and theres a great youtube vid by an american chap.
  12. Serpentine Tensioner pulley bolt stripped

    Get a friendly welder to weld a nut on Sent from my Nexus 10 using Tapatalk
  13. That rust thing...

    i could get the prep done but then id still need bodyshop to put the paint on so as it wont likely be a touch up pen job
  14. Alpina touring on A47

    you on the alpina forum robin?
  15. New E61 530i M Sport owner

    looks good... you keeping those external blind things on the windows?
×